pe01s/d series 1w dc/dc converter, sip-package, high efficiency ds_pe01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 88.5% ? sip package with industry standard pinout ? semi-regulated output voltage ? isolation voltage 1000vdc ? operating temperature range ?40c to +85c ? ul/iec/en 60950-1 safety ? single and dual outputs ? lead free, rohs compliant ? >2 mhours mtbf ? csa / nrtl60950-1 safety approval ? 3 years product warranty the pe01s/d series are miniature, sip package, isolated 1w dc/dc converters with 1,000vdc isolation and very high efficiency . it offers short circuit protection and allows a wide operating temperature range of ?40c to +85c. these products provide a ty pical load regulation of 2.5% to 5.0% depending on each model. the pe01s/d dc/dc converters are a compromise between a fully regulated converter and a non-regulated converter . these isolated dc/dc converters are the latest offering from a world leade r in power systems technology and manufacturing D delta electronics, inc. model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max.load @no load load regulation reflected ripple max. capacitive load @max.oad model number vdc vdc ma ma ma(typ.) ma(typ.) % (max.) ma(typ.) uf % pe01s0505a 5 200 4 238 6.5 84 pe01s0509a 9 110 2 228 5 87 pe01s0512a 12 84 1.5 232 5.2 87 pe01s0515a 15 67 1 230 5 220 87.5 pe01d0505a 5 100 2 237 5.2 84.5 pe01d0509a 9 56 1 234 4.2 86 pe01d0512a 12 42 0.8 233 4.6 86.5 pe01d0515a 5 (4.5 ~ 5.5) 15 34 0.7 236 30 4.5 7 100* 86.5 pe01s1205a 5 200 4 99 5 84 pe01s1209a 9 110 2 95 3.4 86.5 pe01s1212a 12 84 1.5 95 3.4 88.5 pe01s1215a 15 67 1 95 2.7 220 88 pe01d1205a 5 100 2 99 3.9 84.5 pe01d1209a 9 56 1 98 2.8 86 pe01d1212a 12 42 0.8 95 2.9 88.5 pe01d1215a 12 (10.8 ~ 13.2) 15 34 0.7 94 12 2.6 4 100* 87.5 pe01s2405a 5 200 4 50 3.7 84 pe01s2409a 9 110 2 48 2.5 86.5 pe01s2412a 12 84 1.5 48 2.4 87.5 pe01s2415a 15 67 1 48 2.3 220 87.5 pe01d2405a 5 100 2 50 3.7 83.5 pe01d2409a 9 56 1 49 2.5 86 pe01d2412a 12 42 0.8 48 2.4 87 pe01d2415a 24 (21.6 ~ 26.4) 15 34 0.7 49 11 2.3 8 100* 87 * for each output p1
ds_pe01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc input characteristics parameter model min. typ. max. unit 5v input models -0.7 --- 9 12v input models -0.7 --- 18 input surge voltage (1 sec. max.) 24v input models -0.7 --- 30 5v input models 4.5 5 5.5 12v input models 10.8 12 13.2 input voltage range 24v input models 21.6 24 26.4 vdc reverse polarity input current all models --- --- 0.3 a input filter internal capacitor internal power dissipation --- --- 450 mw output characteristics parameter conditions min. typ. max. unit output voltage balance dual output, balanced loads --- 0.1 1.0 % line regulation for vin change of 1% --- 1.05 1.2 % load regulation io=20% to 100% see model selection guide ripple & noise (20mhz) --- 30 60 mv p-p temperature coefficient --- 0.01 0.02 %/ short circuit protection 0.5 second max. general characteristics parameter conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 1000 --- --- vdc i/o isolation resistance 500 vdc 1000 --- --- m ? i/o isolation capacitance 100khz, 1v 40 60 120 pf switching frequency 50 100 120 khz mtbf (calculated) mil-hdbk-217f@25 , ground benign 2,000,000 --- --- hours safety approvals csa 60950-1 recognition, iec/en 60950-1(cb-scheme) recommended outside input fuse 5v input models 12v input models 24v input models 500ma slow-blow type 200ma slow-blow type 100ma slow-blow type environmental specifications parameter conditions min. max. unit operating temperature range (without derating) ambient -40 +85 case temperature --- +95 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 260 p2
ds_pe01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc power derating curve output voltage tolerance output power (%) notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20mhz. 3 these power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 all dc/dc converters should be externally fused at the front end for protection. 5 specifications subject to change without notice. p3 0% 20% 40% 60% 80% 100% output voltage(%) output load current (%) m a x. t y p . +5% +10% +15% vnom -5% -10% +20% +5% +10% +15% vnom -5% -10% +20% m i n .
ds_pe01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc mechanical drawing mechanical dimensions pin connections pin single output dual output 1 +vin +vin 2 -vin -vin 4 -vout -vout 5 no pin common 6 +vout +vout 5v & 12v input : t=6.1[0.24] 24v input : t=7.1[0.28] r ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pins 0.05(0.002) physical outline case size (5&12v input) : 19.5x6.1x10.2mm (0.77x0.24x0.40 inches) case size (24v input) : 19.5x7.1x10.2mm (0.77x0.28x0.40 inches) case material : non-conductive black plastic (flammability to ul 94v-0 rated) weight (5&12v input) : 2.2g weight (24v input) : 2.6g p4 3.2 [0.13] 10.2 [0.40] 19.5 [0.77] t 0.50 [0.02] bottom view 18.5 [0.73] 0.5 [0.02] 2.35 [0.09] 2.54 [0.10] 2x2.54 [2x0.10] 0.5 [0.02] 5.08 [0.20] 0.25 [0.01] 1.3 [0.05] 12 456
ds_pe01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc part numbering system p e 01 s 05 05 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a three(3) years limited warranty. complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice. p5
|
